![]() Trigger VCA's turn function, switch turn direction optionally Disengage and re-engage active differential locks Deactivate and reactivate GPS track guidance If VCA Mod (FS22_VehicleControlAddon) is present: Contour guidance: Automatic control along the field boundary or along the machined area Optional return to field mode after completing the 180° turn. Headland automatic: Activate headland mode automatically when headland is reached. This prevents accidental triggering during transfer to the target field and improves road safety. On/Off switch: Headland Management can be switched on and off. Beep when headland management is activated Disengage and re-engage power take-off(s) and hydraulics Turn plough, single-stage or two-stage (via centre position) Raise lowered implements and lower them again Reduce speed (cruise control) and raise again, reactivate cruise control if previously active In this case, simply reduce the speed briefly. Important: When contour guidance is activated, a working speed of 10 km/h should not be exceeded, otherwise the steering may oscillate strongly. automatic steering along the field boundary or the worked area. New: Headland Management can now perform contour guidance, i.e. The GUI is called up by default with Shift+Ctrl+X. Alternatively, different buttons for activation and deactivation can be configured. It can be activated and deactivated in the vehicle with Shift-X. The headland management system must be added once to the respective vehicle in the shop or in the workshop as a configuration before it can be used. All functions can be activated and deactivated individually for each vehicle via a GUI to achieve ideal adaptation to the work being carried out. With headland management, functions of vehicles can be combined and activated together at the touch of a button to simplify turning manoeuvres when working in the field. Added attach/detach sounds for PTO and hoses.Headland management for tractors, field sprayers, mowers and harvesters. Fixed issue with tools sometimes not being detected (frontloader tools specially). ![]() Fixed PTO attach state on savegame load. Fixed issue with the hoses on the Anderson M160. Allow detaching of vehicles that are turned on by lowering. ![]() Added more blockage of functions when hoses are not connected. moving parts, folding, use ridge markers etc) You won't be able to control hydraulics (e.g. Without attached connection hoses the following can occur: Hold Z (for a short amount of time) in order to attach/detach the connection hoses. Keep in mind that a tool needs a power take off, otherwise it can't be turned on! Hit Z in order to attach/detach the power take off. Like the mod title already suggests it’s not possible anymore to do the quick switches between implements. The mod disables attaching and detaching from inside the vehicle (exceptions are mentioned above). In order to detach, the implement needs to be lowered first! Also make sure that the power take off and connection hoses are detached before detaching the implement. Note: The connection hoses and power take off still require to be attached manually for those implements.* You're still able to attach and detach those implements without having to leave your vehicle. There are some exceptions made for frontloaders, skidsteers, shovels, telehandlers, combines and hooklift implements. When attaching an implement the script forces the implement to stay at it's lowered state. This mod enforces you to attach/detach tools and trailers manually.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |